NEC Mu754244 Datasheet Download Page 83

Page: 83 / 88

PD754144, 754244

Data Sheet U10040EJ2V1DS

Debugging tool

The in-circuit emulators (IE-75000-R and IE-75001-R) are available as the program debugging tool for the

PD754244.

The system configurations are described as follows.

Hardware

IE-75000-R

Note 1

In-circuit emulator for debugging the hardware and software when developing applica-

tion systems that use the 75X series and 75XL series. When developing the

PD754244, the emulation board IE-75300-R-EM and emulation probe EP-754144GS-R

that are sold separately must be used with the IE-75000-R.

By connecting with the host machine, efficient debugging can be made.

It contains the emulation board IE-75000-R-EM which is connected.

IE-75001-R

In-circuit emulator for debugging the hardware and software when developing applica-

tion systems that use the 75X series and 75XL series. When developing the

PD754244, the emulation board IE-75300-R-EM and emulation probe EP-754144GS-R

which are sold separately must be used with the IE-75001-R.

By connecting the host machine, efficient debugging can be made.

IE-75300-R-EM

Emulation board for evaluating the application systems that use the

PD754244.

It must be used with the IE-75000-R or IE-75001-R.

EP-754144GS-R

Emulation probe for the

PD754244GS.

It must be connected to IE-75000-R (or IE-75001-R) and IE-75300-R-EM.

It is supplied with the flexible boards EV-9500GS-20 (supporting 20-pin plastic shrink

EV-9500GS-20

SOPs) and EV-9501GS-20 (supporting 20-pin plastic SOPs) which facillitate connection

EV-950IGS-20

to a target system.

Software

IE control program

Connects the IE-75000-R or IE-75001-R to a host machine via RS-232-C and Centronix

I/F and controls the above hardware on a host machine.

Host machine

Part No.

Distribution media

(product name)

PC-9800 series

MS-DOS

3.5-inch 2HD

S5A13IE75X

Ver. 3.30 to

5-inch 2HD

S5A10IE75X

Ver. 6.2

Note 2

IBM PC/AT and its

Refer to

3.5-inch 2HC

S7B13IE75X

compatible machine

“

OS for IBM PC

”

5-inch 2HC

S7B10IE75X

Notes 1.

Maintenance parts

Ver.5.00 or later have the task swap function, but it cannot be used for this software.

Remark

Operation of the IE control program is guaranteed only on the above host machines and OSs.

Summary of Contents for Mu754244

























































































Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands

NEC Mu754244, Datasheet

Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands