NEC Mu754244 Datasheet Download Page 79

Page: 79 / 88

PD754144, 754244

Data Sheet U10040EJ2V1DS

Table 17-1. Surface Mounting Type Soldering Conditions (2/3)

(3)

PD754144GS-xxx-BA5: 20-pin plastic SOP (300 mil, 1.27 mm pitch)

PD754244GS-xxx-BA5: 20-pin plastic SOP (300 mil, 1.27 mm pitch)

Soldering Method

Soldering Conditions

Recommended

Condition Symbol

Infrared reflow

Package peak temperature: 235

C, Time: 30 seconds max. (at 210

C or higher),

IR35-107-2

Count: Twice or less,

Exposure limit: 7 days

Note

(after that, prebake at 125

C for 10 to 72 hours)

VPS

Package peak temperature: 215

C, Time: 40 seconds max. (at 200

C or higher),

VP15-107-2

Count: Twice or less,

Exposure limit: 7 days

Note

(after that, prebake at 125

C for 10 to 72 hours)

Wave soldering

Solder bath temperature: 260

C max., Time: 10 seconds max., Count: Once

WS60-107-1

Preheating temperature: 120

C max. (package surface temperature)

Exposure limit: 7 days

Note

(after that, prebake at 125

C for 10 to 72 hours)

Partial heating

Pin temperature: 350

C max., Time: 3 seconds max. (per pin row)

–

Note

After opening the dry pack, store it at 25

C or less and 65% RH or less for the allowable storage period.

Caution

Do not use different soldering methods together (except for partial heating).

Remark

For soldering methods and conditions other than those recommended above, contact an NEC

Electronics sales representative.

(4)

PD754244GS-xxx-BA5-A: 20-pin plastic SOP (300 mil, 1.27 mm pitch)

Soldering Method

Soldering Conditions

Recommended

Condition Symbol

Infrared reflow

Package peak temperature: 260

C, Time: 60 seconds max. (at 220

C or higher),

IR60-103-3

Count: Three times or less,

Exposure limit: 3 days

Note

(after that, prebake at 125

C for 10 to 72 hours)

Wave soldering

For details, contact an NEC Electronics sales representative.

–

Partial heating

Pin temperature: 350

C max., Time: 3 seconds max. (per pin row)

–

Note

After opening the dry pack, store it at 25

C or less and 65% RH or less for the allowable storage period.

Caution

Do not use different soldering methods together (except for partial heating).

Remarks 1.

Products with “-A” at the end of the part number are lead-free products.

For soldering methods and conditions other than those recommended above, contact an NEC

Electronics sales representative.

Summary of Contents for Mu754244

























































































Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands

NEC Mu754244, Datasheet

Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands