NEC Mu754244 Datasheet Download Page 78

Page: 78 / 88

PD754144, 754244

Data Sheet U10040EJ2V1DS

17. RECOMMENDED SOLDERING CONDITIONS

The

PD754144 and

PD754244 should be soldered and mounted under the following recommended

conditions.

For technical information, see the following website.

Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)

Table 17-1. Surface Mounting Type Soldering Conditions (1/3)

(1)

PD754244GS-xxx-GJG: 20-pin plastic shrink SOP (300 mil, 0.65 mm pitch)

Soldering Method

Soldering Conditions

Recommended

Condition Symbol

Infrared reflow

Package peak temperature: 235

C, Time: 30 seconds max. (at 210

C or higher),

IR35-00-2

Count: Twice or less

VPS

Package peak temperature: 215

C, Time: 40 seconds max. (at 200

C or higher),

VP15-00-2

Count: Twice or less

Wave soldering

Solder bath temperature: 260

C max., Time: 10 seconds max., Count: Once

WS60-00-1

Preheating temperature: 120

C max. (package surface temperature)

Partial heating

Pin temperature: 350

C max., Time: 3 seconds max. (per pin row)

–

Caution

Do not use different soldering methods together (except for partial heating).

Remark

For soldering methods and conditions other than those recommended above, contact an NEC

Electronics sales representative.

(2)

PD754144GS-xxx-GJG: 20-pin plastic shrink SOP (300 mil, 0.65 mm pitch)

Soldering Method

Soldering Conditions

Recommended

Condition Symbol

Infrared reflow

Package peak temperature: 235

C, Time: 30 seconds max. (at 210

C or higher),

IR35-00-3

Count: Three times or less

VPS

Package peak temperature: 215

C, Time: 40 seconds max. (at 200

C or higher),

VP15-00-3

Count: Three times or less

Wave soldering

Solder bath temperature: 260

C max., Time: 10 seconds max., Count: Once

WS60-00-1

Preheating temperature: 120

C max. (package surface temperature)

Partial heating

Pin temperature: 350

C max., Time: 3 seconds max. (per pin row)

–

Caution

Do not use different soldering methods together (except for partial heating).

Remark

For soldering methods and conditions other than those recommended above, contact an NEC

Electronics sales representative.

Summary of Contents for Mu754244

























































































Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands

NEC Mu754244, Datasheet

Search results

Summary of Contents for Mu754244

Reviews:

Related manuals for Mu754244

Brands by name

Popular brands