NATIONAL
INSTRUMENTS
®
The Software is the Instrument
®
Installation Guide
_____________________________
Product and company names are trademarks or trade names of their respective companies.
320815A-01
© Copyright 1994 National Instruments Corporation. All rights reserved.
October 1994
DAQ Board Accessories Rack-Mount Kit
This guide describes how to assemble the rack-mount hardware for the AMUX-64T analog
multiplexer board and the SC-205X, SC-206X, SC-207X, and BNC-208X Series signal
conditioning boards in a standard 19-in. rack-mount cabinet.
Introduction
There are four versions of the rack-mount kit—single- and double-height kits with an acrylic
plastic cover, and single- and double-height kits with a metal wraparound cover. The metal
wraparound cover kits are ideal for high-voltage applications. However, we do not recommend
the metal wraparound cover kits for use with the BNC-208X Series boards.
What You Need to Get Started
You will need the following parts from your DAQ board accessories rack-mount kit, depending
on the version you have:
Plexiglas cover kit
Item
Component
Quantity
2
Cover, rack-mount, Plexiglas
1
4
Washer, flat, #4, nylon
4
Metal wraparound cover kit
Item
Component
Quantity
2
Cover, rack-mount, metal wraparound
1
4
Washer, flat, #4, SS
4
