User’s Manual U18371EJ1V0UM
13
CHAPTER 2 NAMES AND FUNCTIONS OF HARDWARE
This chapter describes the part names and functions of MINICUBE2 and its accessories.
The part names described in this chapter are used throughout this document. This chapter provides an
overview of the various functions. Reading it through, the reader will gain a basic grasp of MINICUBE2 and the
self-check board that will facilitate reading of subsequent chapters. While reading this chapter, also check if the
hardware has a defect.
2.1 Names of Supplied Hardware
Figure 2-1 shows the names of hardware supplied with MINICUBE2.
Figure 2-1. Names of Supplied Hardware
MINICUBE2
78K0-OCD board
(A 20 MHz oscillator mounted)
USB cable
16-pin target cable
10-pin target cable
MINICUBE2
78K0-OCD board
(A 20 MHz oscillator mounted)
USB cable
16-pin target cable
10-pin target cable
