CHAPTER 3 HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
User’s Manual U18371EJ1V0UM
20
3.1.2 Circuit connection examples
The circuit design on the target system varies depending on the communication interface mode. Refer to the
following table and see the relevant circuit connection example.
Caution The constants described in the circuit connection example are reference values. If you perform
flash programming aiming at mass production, thoroughly evaluate whether the specifications of
the target device are satisfied.
Table 3-3. Corresponding Circuit Connection Diagrams
Communication Interface Mode
Refer to:
UART
Figure 3-2
CSI-H/S
Figure 3-3
