4-18 Upgrading Your System
Option Board Hardware Configurations
Option Board
IRQ
3
Memory
Address
I/O Address
Option Slot
AMI MegaRAID
EXPRESS® 7
Controller board
Set by BIOS
Set by BIOS
Set by BIOS
PCI Slot 2 (see
PCI/ISA Slot
Location
illustration
above)
Installing an Option Board
1.
Power off the system and remove the left side panel as described
earlier in this chapter.
2.
Remove and save the expansion slot screw and cover.
A
B
Removing the Expansion Slot Screw and Cover
!
CAUTION
Observe static precautions. Use an antistatic wrist strap.
3.
Remove the option board from its protective wrapper, holding the
board only by the edges. Do not touch the board components or the
gold connectors.
4.
Record the option board serial number in the equipment log.
5.
Set any board jumpers or switches as described in the
documentation that comes with the option board.
6.
Refer to the documentation accompanying the option board for
information on whether the board is a PCI or ISA board. Refer to
“Option Board Hardware Configurations” table to determine the
recommended option board slot assignment and configuration
parameters.
Summary of Contents for LS2400
