![background image](http://html.mh-extra.com/html/nec/ls2400/ls2400_service-and-reference-manual_251349184.webp)
C-10 Emergency Management Port Console
Serial Line
- must be filled out when the line selection is set to
Direct connect (Serial Line).
Baud Rate
- must be 19200 for EMP to connect properly.
COM Port No.
- set the COM Port number to which the null
modem serial cable is connected.
Connect
- initiates connection to the connected server. When this
button is clicked, you are prompted for the EMP password.
Config
- displays the Phonebook dialog.
Cancel
- exits the Connect dialog without any action taken.
Help
- displays dialog level help information.
Power On/Off
Selecting Power On/Off from the Action menu allows you to power the
server on or off, with post-power-up options. It generates the Power
on/off dialog.
Power On/Off Dialog
Options available in the dialog are:
Power ON
- powers on the server.
Power OFF
- powers off the server. This option is not allowed if the
server is configured in RESTRICTED mode for EMP operations.
Post-power-up option -
sets the mode selection of the server to EMP
active or BIOS redirection. The setting is available after the next
power-up. The default selection is EMP active.
Cancel
- exits the dialog without any action taken.
Help
- displays dialog level help information.
Summary of Contents for LS2400
