4-44 Upgrading Your System
Replacing the LED Assembly
5.
Feed the cables through the right side of the system chassis and
remove the LED assembly.
6.
Feed the cables of the replacement LED assembly through the
mounting holes in the front and side of the chassis.
7.
Insert the bottom tab of the LED assembly into mounting hole in the
front of the chassis and while pushing downward on the top tab of
the LED assembly, snap the LED assembly into place.
8.
Connect the power and hard disk drive LED cables to the system
board connectors. The power LED cable is green and black; insert
the connector so that the green wire is above the black wire. The
hard disk drive LED cable is red and black; insert the connector so
that the red wire is above the black wire.
9.
Install the front panel as described earlier in this chapter.
10.
Install the side panels as described earlier in this chapter.
11.
Power on the system.
Summary of Contents for LS2400
