1. Installing Internal Optional Devices
Express5800/R120g-2E User's Guide
49
Chapter 2 Preparations
1.7
Removing Support Bar
Remove Support Bar when installing or removing the following component:
TPM Kit
Processor (CPU)
DIMM (memory module)
Flash backup unit for RAID controller
Backup device
PCI card
Additional 2.5-inch HDD Cage
Additional 2.5-inch HDD Cage (Rear)
2.5-inch PCIe SSD installation kit
1. See steps 1 to 7 in
Chapter 2 (1.3
Overview of Installation and Removal
) for preparations.
2. Remove the two screws from Support Bar.
3. Lift Support Bar, and remove it from the server.
