1. Installing Internal Optional Devices
Express5800/R120g-2E User's Guide
64
Chapter 2 Preparations
1.11.5
Installation
Install a DIMM by using the following procedure.
1. See steps 1 to 8 in
Chapter 2 (1.3
Overview of Installation and Removal)
for preparations.
2. Open levers at both ends of the target DIMM slot.
3. Push the DIMM straight into the socket.
When a DIMM is inserted into the socket,
the lever automatically closes.
Important
•
Make sure the orientation of the DIMM. The DIMM has a notch, preventing
being incorrectly inserted.
•
Do not apply too much pressure when you push a DIMM into the socket.
Doing so can damage the socket or terminal part.
4. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
5. Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, see
Chapter 3 (1. POST Error Message)
in "
Maintenance Guide
".
6. Run BIOS Setup Utility, and select
Memory Configuration
and then
Memory Information
from the
Advanced
menu. Make sure the capacity of added DIMM is displayed properly.
See
Chapter 3 (
2
. BIOS Setup Utility (SETUP)
.
7. Select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory Retest
.
After that, select
Save Changes and Exit
to reboot.
8. If using a Windows OS, see
Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information))
in
"
Installation Guide (Windows)
".
For other OS, follow the manual of the OS.
Tips
We recommend that the size of paging file be set to the recommended size (total
memory size x 1.5) or more.
Notch
Key
