1. Installing Internal Optional Devices
Express5800/R120g-2E User's Guide
65
Chapter 2 Preparations
1.11.6
Removal / Replacement
Remove a DIMM in the following procedure.
Note
•
When removing a defective DIMM, check error messages displayed at POST or
NEC ESMPRO and check the DIMM socket where the defective DIMM is
installed.
•
At least one DIMM needs to be installed for the server to operate.
1. See steps 1 to 7 in
Chapter 2 (1.3
Overview of Installation and Removal)
for preparations.
2. Open levers of the DIMM socket outward.
The socket is unlocked and DIMM can be
removed.
3. Pull out the DIMM straight.
4. Confirm that no error messages are displayed on POST. If any error message is displayed, see
Chapter 3
(1. POST Error Message)
in "
Maintenance Guide
".
5. Run BIOS Setup Utility, select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory Retest
. After that, select
Save Changes and Exit
to reboot.
6. If using a Windows OS, see
Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information))
in
"
Installation Guide (Windows)
".
For other OS, follow the manual of the OS.
Tips
We recommend that the size of paging file be set to the recommended size (total
memory size x 1.5) or more.
