NEC EXPRESS800, Service Manual

Page: 12 / 78

1-2 Introduction
Introduction
The system rack is an attractive enclosure designed to store and protect your server
components. The system rack allows you to integrate your server, monitor, and other
components in one cabinet that may be installed in a limited amount of floor space in
just about any location. Removable side walls and front and rear doors ensure easy
access to all installed components, while a special locking system prevents
unauthorized access.
System Rack Models
The system rack is available in three models: 42U, 36U and 27U. The only difference in
the three models is the height of the rack. The size of each system rack is as follows:
!
Model 42U –
2000mm (78.7in) H x 600mm (23.6in) W x 1000m (39.4in) D.
!
Model 36U – 18
00mm (70.9in) H x 600mm (23.6in) W x 1000m (39.4in) D.
!
Model 27U – 14
00mm (55.1in) H x 600mm (23.6in) W x 1000m (39.4in) D.
This guide contains the information necessary to install the 42U System Rack. The
installation process for the 36U and 27U is similar to the 42U model.
Express5800 Configuration Assistant
The Express5800 Configurator Assistant is a software program that provides detailed
technical information on building server configurations. This program is especially
helpful when configuring systems that will be installed into a system rack. Contact your
sales representative for more information on the Express5800 Configuration Assistant.