NEC Express5800/R320d-M4 Series, User Manual

Page: 91 / 98

3. EXPRESSSCOPE ENGINE 3
Chapter 3 Setup
3.2
EXPRESSSCOPE ENGINE 3 Network configuration
Below is an example of the configuration procedure which enables EXPRESSSCOPE Engine 3 to be used via a
web browser.
1. Run POST according to
Chapter 3 (1.1.1 Flow of POST)
. After a while, the following message appears
on the lower left of the screen.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
2. Press the <F4> key to launch Off-line TOOL while the message is displayed..
You can also press the <F4> key while the message is being displayed to open the Off-line TOOL MENU
screen.
3. Select your keyboard type on keyboard selection screen.
4. When the Off-line TOOL MENU appears, select
BMC Configuration
,
BMC Configuration
,
Network:
CPU/IO module 0/1
, and then
Property
.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 User's Guide
91