1. Power ON
Chapter 3 Setup
1.
Power ON
To power on Express5800/ft series, press the POWER switch on front panel.
Follow the steps below to turn on the power.
Tips
•
Do not power on the server unless the module POWER LED on CPU/IO modules 0
and 1 start blinking green.
•
If you power off the server, wait at least 30 seconds before turning it on again.
1. Power on the display unit and other peripheral devices connected to the server.
Note
If the power code is connected to a power controller like a UPS, ensure that it is powered
on.
2. Remove the front bezel.
3. Lift up the acrylic cover in front of the POWER switch, and press the POWER switch of the front panel.
Acrylic cover
POWER switch
System POWER LED
Module POWER
LED
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 User's Guide
81
Summary of Contents for Express5800/R320d-M4 Series
