NEC Express5800/R320d-M4 Series, User Manual, Page: 77 / 98

2. Installation and Connection
Chapter 2 Preparations
2.4
Connection
Connect peripheral devices to the server.
Connectors that allow a variety of peripheral devices to be connected are provided at the front and rear of the
server. Images on the following pages show the peripheral devices that can be connected in their standard state
and their respective connector positions.
WARNING
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, see
Safety precautions in Precautions for Use.
•
Do not hold the power plug with wet hands
•
Do not connect the ground wire to a gas pipe
CAUTION
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, see Safety precautions in Precautions for Use.
•
Use only the specified outlet to insert.
•
Do not connect the power cord to an outlet that has an illegal number of
connections.
•
Insert the power plug into the outlet as far as it goes.
•
Use only the specified power cord.
•
Do not connect or disconnect the interface cable while the power cord is
plugged in the outlet.
•
Use only the specified interface cable
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 User's Guide
77