NEC Express5800/R320d-M4 Series, User Manual, Page: 79 / 98

2. Installation and Connection
Chapter 2 Preparations
2.4.1
Connecting to a uninterruptible power supply (UPS)
To connect the power cord of the server to the uninterruptible power supply (UPS), use the connector output on
the rear of the UPS. For details, refer to the manual supplied with the UPS.
When the power cord is connected to a UPS, the BIOS settings may need to be changed in order to link the
server with the power supply from the UPS.
To change the settings, select
Server
and then
AC-LINK
in the BIOS setup utility, and change the displayed
parameters. Select
Power On
to perform automatic operations by using the UPS. For details, refer to
Chapter 3
(1. System BIOS)
in "
Maintenance Guide
".
Option slot
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
Universal Serial Bus (USB) port
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 User's Guide
79