1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
79
Chapter 2 Preparations
11. Use the four screws you removed in step 3 to fix
the 2.5-inch HDD cage.
This completes the replacement procedures for HDD cages.
1.12.2
Installation
Follow the procedure below to install the 2.5-inch Hard Disk Drive.
1. Refer to the manual provided with the Hard Disk Drive before installation, and specify the settings of
the Hard Disk Drive.
Number of
additional drives
Location of the bay where the drives
will be installed
Serial ATA connector of the connecting
motherboard
1st
The first level from the bottom
Serial ATA connector 0
2nd
The second level from the bottom
Serial ATA connector 1
3rd
The third level from the bottom
Serial ATA connector 2
4th
The fourth level from the bottom
Serial ATA connector 3
2. Refer to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
3. Remove the side cover while referring to
Chapter 2 (1.4 Removing the Side Cover)
.
4. Remove the power cable on the motherboard.
5. If the Hard Disk Drive is already installed, remove the interface cable and power cable connected to
the Hard Disk Drive.
Serial ATA
connector 2
Serial ATA
connector 1
Serial ATA
connector 3
Serial ATA
connector 0
