1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
43
Chapter 2 Preparations
1.3
Overview of Installation and Removal
Install/remove components by using the following procedure.
•
If the server is ON, turn it off.
Refer to Chapter 3 (6.
•
Disconnect the power cord from the outlet and the server.
•
Disconnect all cables connected to the connector at the rear.
•
Remove the side cover.
Refer to
Chapter 2 (1.4. Removing the Side Cover)
.
•
Remove the front bezel.
Refer to
Chapter 2 (1.5 Removing the Front Bezel)
.
•
Depending on the components to be installed or removed, follow the procedure in order.
Refer to
Chapter 2
to
•
Connect cables.
Refer to
Chapter 2
.
•
Attach the front bezel.
Refer to
Chapter 2 (1.16 Attaching the Front Bezel).
•
Attach the side cover.
Refer to
Chapter 2
1.17 Installing the Side Cover)
.
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to
Chapter 2 (2.2 Connection)
.
