1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
84
Chapter 2 Preparations
7. Pull the optical disk drive out of the server and
remove it.
This completes the optical disk drive removal
procedures.
8. Insert the screw holes on the left side of the internal
DVD SuperMULTI drive into the hooks described in
step 5.
9. Press down on the right side of the internal DVD
SuperMULTI drive. The drive is secured.
10. Connect the interface cable and power cable to the installed internal DVD SuperMULTI drive.
For more information
about cable connections, refer to
Chapter 2
11. Install the cables that were removed in step 1 to 3 and component parts, and assemble the server.
This completes the installation procedures.
1.13.2
Removal
Refer to
Replacement procedures
to remove the optical disk drive.