1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
88
Chapter 2 Preparations
7. Orient the screw holes of the device with the screw
holes of the server and attach them with the two
screws (screw set 504) supplied with the server.
Important Be sure to use the screws that were provided with the server (screw set 504)
and not screws that were provided with the device.
8. Connect the interface cable and power cable to the installed 5.25-inch device.
For more information, refer to
Chapter 2
.
9. Assemble the server.
10. For SAS devices, use the BIOS utility of the SAS controller and specify the transfer rate and other
settings.
For more information, refer to the manual provided with the SAS controller.
11. Install device drivers for installed devices as needed.
For more information, refer to the manual provided with the device.
1.14.2
Removal
You can remove the file device by reversing the installation procedure. If the devices are to remain
removed, attach the stored blank covers.
