1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
72
Chapter 2 Preparations
1.11.1
Installation
Follow the procedure below to install the 3.5-inch Hard Disk Drive.
1. Refer to the manual provided with the Hard Disk Drive before installation, and specify the settings of
the Hard Disk Drive.
Number of
additional
drives
Location of the bay
where the drives will be
installed
Serial ATA connector of the
connecting motherboard
1st
The first level from the
bottom
Serial ATA connector 0
2nd
The second level from the
bottom
Serial ATA connector 1
3rd
The third level from the
bottom
Serial ATA connector 2
4th
The fourth level from the
bottom
Serial ATA connector 3
2. Refer to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
3. Remove the side cover while referring to
Chapter 2 (1.4 Removing the Side Cover)
.
4. If the Hard Disk Drive is already installed, remove the interface cable and power cable connected to
the Hard Disk Drive.
5. Remove the four screws securing the HDD cage.
Serial ATA
connector 3
Serial ATA
connector 2
Serial ATA
connector 0
Serial ATA
connector 1
