2. System BIOS Setup
Express5800/E120d-M User's Guide
91
Chapter 3 Setup
2.4
Cases that Require Configuration
Only if a case applies to any of following cases, use the SETUP utility to change a parameter which was
configured as factory setting. Other than cases described below, do not change the settings. A list of SETUP
parameters and factory settings are described in
Chapter 2 (1. System BIOS) in "Maintenance Guide".
Category
Description
To be changed
Remark
Change date and time
Main
System Date
Main
System Time
Configurable on OS
Enable NumLock at power-on
Boot
Bootup Numlock State
On
Basic
Hide the logo during POST
Boot
Quite Boot
Disabled
By pressing the <Esc> key,
prevent the display of the
logo.
Memory
Add or change DIMM
Advanced
Memory Configuration
Memory Retest
Yes
After rebooting,
Memory
Retest
changes
No
automatically.
Optional
board
Disable Option ROM Scan of
installed option board
Advanced
PCI Configuration
PCI
Device Controller and Option ROM
Settings
PCIXX Slot Option ROM
Enabled
XX
is PCI slot number of the
option board
Change the boot order of
devices
Boot
Boot Option Priorities
Change the boot priority
When you use
EXPRESSBUILDER, set
CD/DVD
to the highest
priority.
Use remote power on function
(via modem)
Advanced
Advanced Chipset
Configuration
Wake On Ring
Enabled
Use remote power on function
(via RTC alarm)
Advanced
Advanced Chipset
Configuration
Wake On RTC Alarm
Enabled
Boot
Use console redirection
feature
Advanced
Serial Port Configuration
Console Redirection Setting
Change respective setting.
Set a password
Security
Administrator Password
Enter a password
Security
User Password
Enter a
password
If password is set, a
message to enter password
is displayed at next time
SETUP is launched.
Security
Restrict bootup by entering
password
Security
Password on Boot
Enabled
Can be selected when
password is set.
When the server is supplied
with power from UPS, always
turn on the power.
Server
Power Control Configuration
AC-LINK
Power On
If it is turned off by using
POWER switch, leave it OFF
even when UPS supplies
power.
Server
Power Control
Configuration
AC-LINK
Last State
UPS
Powerlink
Keep the power OFF even
when UPS supplies power.
Server
Power Control Configuration
AC-LINK
Stay off