1. Specifications
Express5800/E120d-M User's Guide
99
Chapter 4 Appendix
1.
Specifications
N8100-1909F
N code
N8101-1908F
CPU
Not pre-installed / Intel ®Xeon® processor
Supported CPU
N8101-601F
E5-2407
N8101-602F
E5-2430
N8101-603F
E5-2430L
N8101-604F
E5-2450L
N8101-605F
E5-2470
Clock speed
2.20GHz
2.20GHz
2.00GHz
1.80GHz
2.30GHz
No. of CPUs
Standard / Maximum
0 / 2
3rd cache
10M
15M
20M
CPU
Number of cores (C) /
Number of threads (T)
(1 CPU)
4C/4T
6C/12T
8C/16T
Chipset
Intel® C602 chipset
Standard/Maximum
Not pre-installed / Unbuffered DIMM: 48GB (12x 4GB),
Registered DIMM: 384GB (12x 32GB)
DDR3L-1600 Unbuffered DIMM (2/4GB),
DDR3L-1600 Registered DIMM (8/16GB),
DDR3L-1066 Registered DIMM (32GB)
Memory module
DDR3L-800 Registered DIMM (32GB)
Maximum clock speed
1066 MHz
1333 MHz
1600 MHz
Memory
Error check, correction
ECC, x4 SDDC
Standard
Not pre-installed
Maximum
2.5-inch HDD: SATA 4TB (4x 1TB), SAS 3.6TB (4x 900GB),
2.5-inch SSD: SAS 1.6TB (4x 400GB)
Hard disk
drive
Hot swap
Supported
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Interface level /
RAID System
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
External drive (Option) *1
FDD
Option: Flash FDD (1.44MB) *2
Auxiliary
storage
device
Device bay
None
1x PCI EXPRESS 3.0 (x16 lane, x16 socket) (Low profile, 167.6 mm in length)
Expansion
bay
Supported slot
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Chip / VideoRAM
Management controller chip / 32 MB
Graphics
Graphic display / resolution
16,770,000 colors: 640 x 480, 800 x 600, 1,024 x 768, 1,280 x 1,024
Interface
3xUSB 2.0 (2x Front, x1 Internal), 1x Analog RGB (Mini D-sub 15-pin, 1x Front),
1x Serial port (RS-232C compliant D-sub 9-pin, Serial Port A, 1x Rear),
2x1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T, RJ45, 2x
Rear),
1x Management LAN connector (100BASE-T/10BASE-T, RJ45, 1x Rear)
1000W, 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)
(Maximum: 2)
Power supply
100/200VAC ±10%, 50/60Hz ±3Hz
Redundant power supply
Supported (hot-plug available)
Redundant fan
Supported (hot-plug unavailable)
220.1 mm
×
780.0 mm
×
40.4 mm (Projections are excluded)
External dimensions
(width
depth
height)
220.1 mm
×
820.2 mm
×
40.4 mm (Projections are included)
Weight (Standard/ Max.)
5kg / 7kg
Power consumption (12 VDC, at maximum
configuration, at standby)
132 W
Power consumption (12V DC, at maximum
configuration, at high load)
354 W
Power consumption (12V DC, at maximum
configuration, in 40°C environment)
383 W
Operating: 10 to 40°C / 20 to 80%
Temperature/Humidity
Storage: –10 to 55°C / 20 to 80% (No condensation either when operating or when
stored)
Accessories
User’s Guide (electronic document) included), Getting Started,
Installed OS
–
Supported OSs
Support by NEC
None
*1
Prepare at least one external DVD-ROM per system for maintenance and OS reinstallation purposes.
*2
Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide.
