NEC Express5800/E120d-M User Manual Download Page 69

Page: 69 / 100

1. Installing Internal Optional Devices

Express5800/E120d-M User's Guide

Chapter 2 Preparations

1.12.1

Installation

Install a hard disk drive by using the following procedure.

Note

In the RAID System, use hard disk drives that have the same specifications (capacity,

rotational speed, and standard).

1. Refer to steps 1 to 3 in

Chapter 2 (1.3 Overview of Installation and Removal)

for preparations.

2. Locate the bay where you are going to install the hard disk drive.

The server provides 4 bays. Install hard disk drives in ascending port number order.

3. Remove the dummy trays.

Dummy trays are installed in all bays except for bay 0.

Note

Keep the dummy trays for future use.

4. Unlock the handle of the tray.

Summary of Contents for Express5800/E120d-M





































































































Search results

Summary of Contents for Express5800/E120d-M

Reviews:

Related manuals for Express5800/E120d-M

Brands by name

Popular brands

NEC Express5800/E120d-M, User Manual

Search results

Summary of Contents for Express5800/E120d-M

Reviews:

Related manuals for Express5800/E120d-M

Brands by name

Popular brands