NEC Express5800/B120a-d, User Manual

Page: 115 / 294

Installing the Operating System with Express Setup 5-43
4.
Modify [Dump file:] in the [Write debugging information] group box.
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP
IMPORTANT:
Windows Server 2008 64-bit (x64) Edition
„
To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
„
Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express 300MB".
„
In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to
adding memory. Verify the size of the empty space in the
debugging information (memory dump) write destination drive.
Windows Server 2008 32-bit (x86) Edition
„
To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
„
Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express 300MB"(In
case the memory capacity is more than 2GB, a free area of
"2048+300MB" or more).
„
In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to
adding memory. Verify the size of the empty space in the
debugging information (memory dump) write destination drive.
5.
Click [Settings] on the [Performance] group box.
The [Performance Options] window appears.
6.
Click [Advanced] tab on the [Performance Options] window.
7.
Click [Change] on the [Virtual memory] group box.
8.
Uncheck the [Automatically manage paging file size for all drives] box, and check
[Custom size].