4-6
Disassembly and Reassembly
Preparation
Have the following tools available:
!
Phillips screwdriver (#2 bit)
!
flat-head screwdriver
!
small needle nose pliers
!
pen or pencil
!
utility knife
!
ESD workstation or antistatic wrist strap (recommended)
!
IC removal tool.
Equipment Log
Use the equipment log form located at the end of this guide to record the model
and serial number of your system, all installed options, and any other pertinent
information specific to your system. You need this information when
configuring your system.
Removing the Front Door of the Tower
Cabinet
Note:
This procedure is for tower-based systems only.
To remove the front door of the tower cabinet, perform the following (see
Figure 4-1).
1.
Observe the safety and ESD precautions listed at the beginning of this
chapter.
2.
Open the front door of the server. See
Opening the Front Door of the Tower
Cabinet
in chapter 2.
3.
The front door is secured to the chassis by a screw in its top door hinge.
Remove the screw in the top door hinge of the front door.
4.
Pull the door hinge out of the top of the chassis and allow the front door to
drop down so that its bottom door hinge disengages from the bottom hinge
slot in the chassis.
5.
Remove the front door.
Summary of Contents for Express5800/140Hb
