NEC Express5800/120Ei, User Manual

Page: 83 / 414

Configuring Your Server 4-15
Option Parameter Description Your Setting
BMC IRQ Disabled
[IRQ 11] Determines routing of the BMC
interrupt.
Post Error Pause Disabled
[Enabled] Specify whether to stop the POST
once at the end of POST if an error
occurs during the POST.
AC-LINK Stay Off
[Last State]
Power On Specify the state of power when the
AC power to the server is turn off
once and then on.
Power ON Delay
Time (Sec) [20] - 255 Specify the power on delay time
within the range between 0 and 255
seconds. The time specified is valid
when "Power On" or "Last State" is
specified for AC LINK.
Platform Event
Filtering
Disabled
[Enabled]
Specify whether to enable or disable
the platform event filtering (PEF)
feature.
[ ]: Factory-set
IMPORTANT:
To power on the server from the UPS (Uninterruptible
Power Supply), select [Server] - [AC LINK] - [Power On].
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown* Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.