NEC Express5800/120Ei, User Manual

Page: 73 / 414

Configuring Your Server 4-5
Main
Option Parameter Description Your Setting
System Time HH:MM:SS Set the system time.
System Date MM/DD/YYYY Set the system date.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds Allows slower spin-up drives to
come ready.
Primary IDE Master/
Primary IDE Slave
Secondary IDE Master/
Secondary IDE Slave Select submenu Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Processor Settings Select submenu Shows the processor settings
submenu.
Language [English (US)]
Français (FR)
Deutsch (DE)
Español (SP)
Italiano (IT) Select which language BIOS
displays.
[ ]: Factory-set
IMPORTANT:
Check and adjust the system clock before the
operation if any of the following conditions is applicable.
– After carriage of device
– After storage of device
– After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative to ask
maintenance.