NEC Express5800/120Ei, User Manual

Page: 75 / 414

Configuring Your Server 4-7
Advanced
Option Parameter Description Your Setting
Memory Configuration – Displays Memory Configuration
submenu.
PCI Configuration – Displays PCI Configuration
submenu.
Peripheral Configuration – Displays Peripheral Configuration
submenu.
Advanced Chipset Control – Displays Advanced Chipset Control
submenu.
Boot-time Diagnostic
Screen Enabled
[Disabled] When disabled, the BIOS will display
the NEC logo during POST. Press
Esc to switch to the POST execution
screen.
Reset Configuration Data [No]
Yes Select "Yes" if you want to clear the
system configuration data during the
next boot. Automatically reset to
"No" in the next boot.
NumLock On
[Off] Sets power on Numlock state.
Memory/Processor Error [Boot]
Halt If "Halt" is selected, the boot is
stopped when POST error occurs.
[ ]: Factory-set
IMPORTANT:
Be sure to take a note of boot priority before selecting
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to reboot the
system, run BIOS SETUP utility, and provide settings for boot device
order again.