1. Installing Internal Optional Devices
Express5800/T120d User’s Guide
68
Chapter 2 Preparations
1.10.6
Removal
Remove a DIMM in the following procedure.
Note
When removing a defective DIMM, check error messages displayed at POST or
NEC ESMPRO and check the DIMM socket where the defective DIMM is
installed.
At least one DIMM needs to be installed for the server to operate.
1.
Refer to steps 1 to 7 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
Rotate both levers of the DIMM socket
outward. The socket is unlocked and DIMM
can be removed.
3.
Pull out the DIMM straight.
4.
Confirm that no error messages are displayed on POST. If any error message is displayed, refer to
Chapter 3 (1. POST Error Message)
in "
Maintenance Guide
".
5.
Run BIOS Setup Utility, select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory Retest
. After that, select
Save Changes and Exit
to reboot.
6.
Set the size of Paging File to the recommended value (Total memory size x 1.5) or more.
If using a Windows OS, refer to
Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information))
in
"
Installation Guide (Windows)
".
For other OS, follow the manual of the OS.
