NEC ELECTRA ELITE IPK II, System Hardware Manual, Page: 114 / 642

___________________________________________________________________________________
5 - 26 Installing KSUs
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.10.3 Fuse Replacement
1. Turn off the power switch and remove the front cover on the
KSU. (Refer to
Figure 5-4 Removing the Front Panel of the
KSU .)
2. Pull out the drawer that holds the PSU and disconnect the
cable as shown in
Figure 5-25 Removing the PSU from the
KSU .
3. Replace the fuses as necessary and return the PSU to the
KSU. Fuse F1 is a 125V, 6A fuse for AC input. Fuse F101 is a
125V, 6.0A fuse for DC input.
Figure 5-25 Removing the PSU from the KSU
For continued protection against risk of fire, replace
fuses with the same type and rating originally
installed.
Cable
Connections
Fuse