NEC e808n Page 53 Product Manual Download

Page: 53 / 158

Advanced Features

-43-

To Start/Switch Task During Another Task

High-Speed Data Communications

(available in 3G mode only)

The e808 supports high-speed data communications for your PC. Just connect the attached USB cable and

install the contents of the CD-ROM to your PC. Refer to

External Connect

on page 56 for details.

Please check that your operator allows use of your e808 as a modem to connect to the internet.

Installation and e808 Settings

For detailed information on PC installation, refer to “e808 Software Manual”, in pdf format on your e808

"Tools and Utilities" CD-ROM.
When you use the USB cable, install driver and WP-TCP software in the CD-ROM. Follow the installation

wizard.

What is a WP-TCP software?

This software optimises the registry setting of your PC. If you want to have the best PC communication

performance through the USB cable, this software is recommended.

Settings for PC Internet Connection

General steps for PC settings are described by the following. For the details of these settings, please refer to

the PC documentation.

Do this

Go back to the standby screen

Press the

MENU

key for a few seconds.

Start another task

Dial the phone number to make a call.
Press the

SK1 (Message)

key to start the message function.

Press the

SK2 (Contact)

key or

key to start the contact list

function.

Press the

key to access to the

sites.

Press the

MENU

key to display

Task Menu

Switch to another task

Press and hold the

MENU

key.

Summary of Contents for e808n































































































































































Search results

Summary of Contents for e808n

Reviews:

Related manuals for e808n

Brands by name

Popular brands

NEC e808n, Product Manual

Search results

Summary of Contents for e808n

Reviews:

Related manuals for e808n

Brands by name

Popular brands