NEC DT310 User Manual Download Page 94

Page: 94 / 254

• TO RESTORE PERSONAL SETTINGS

DT730/DT710 Series user can restore the personal

settings of DT Series. To download the backup file to

the telephone, the DT Series needs to be connected to

the network that has FTP (TFTP server).

Before starting the download, an IP Address of the

FTP/TFTP Server must be entered from DT Series.

STEP 1: Set up the FTP/TFTP server.

Put the backup file you want to restore into

the designated directory (for Windows IIS,

the default is “C:\InetPub\ftproot) of the FTP

server.

Put the backup file you want to restore into a

desired directory of TFTP server and then

specify it as the directory for downloading.

STEP 2: Select

Setting

(DT730)

Setting

(DT710) on the

Menu

screen.

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key (DT730) /

key (DT710)

STEP 3: Select

Data Backup/Restore

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

STEP 4: Select

Protocol

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

Note:

For details on the FTP/TFTP service, contact the
System Administrator.

DT730/DT710

Tool

[Menu]

Call Func.

Presence

Favorite

Config

Directory

Back



History

Setting



[Setting]

Back

User Setting

Download



Data Backup/Restore

Summary of Contents for DT310































































































































































































































































Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands

NEC DT310, User Manual

Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands