NEC DT310 User Manual Download

Page: 92 / 254

STEP 14:The display goes back to the

FTP Settings

screen. Press

Back

soft key to display

the

Backup/Restore

screen.

STEP 15:Select

Server Address

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

STEP 16:Enter an IP address of the destination FTP/

TFTP server. For example, to set the IP ad-

dress of 10.41.208.205, enter 10*41*208*205

[separate with an asterisk (*)].

After entering an IP address, press

soft key.

STEP 17:The display goes back to the

Backup/Re-

store

screen. Select

Data Backup

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

STEP 18:The default file name will be displayed as fol-

lows:

[FTP Settings]

Back



Folder

User ID

Password

[Backup/Restore]

Back



Data Backup

Data Restore



FTP Settings

Protocol

Server Address

[Server Address]

Back

‘*‘For‘.‘

[Backup/Restore]

Back



Data Restore



FTP Settings

Protocol

Server Address

Data Backup

Summary of Contents for DT310































































































































































































































































Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands

NEC DT310, User Manual

Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands