NEC DT310 User Manual Download Page 89

Page: 89 / 254

• TO BACKUP PERSONAL SETTINGS

DT730\DT710 Series user can backup personal

settings of DT Series to FTP/TFTP server. To back up

the setting data, the DT Series needs to be connected

to the network that has FTP (TFTP server).

Before starting the backup, an IP Address of the FTP/

TFTP Server must be entered from DT Series.

STEP 1: Set up the FTP/TFTP server.

Confirm the designated directory (for Win-

dows IIS, the default is “C:\InetPub\ftproot)

for the backed up file.

Specify a desired destination directory for the

backed up file.

STEP 2: Select

Setting

(DT730)

Setting

(DT710) on the

Menu

screen.

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key (DT730) /

key (DT710)

STEP 3: Select

Data Backup/Restore

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

STEP 4: Select

Protocol

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

Note:

For details on the FTP/TFTP service, contact the
System Administrator.

DT730/DT710

Tool

[Menu]

Call Func.

Presence

Favorite

Config

Directory

Back



History

Setting



[Setting]

Back

User Setting

Download



Data Backup/Restore

Summary of Contents for DT310































































































































































































































































Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands

NEC DT310, User Manual

Search results

Summary of Contents for DT310

Reviews:

Related manuals for DT310

Brands by name

Popular brands