NEC DT310 User Manual Download Page 48

Page: 48 / 254

• TO ADJUST TRANSMISSION/RECEIV-

ING VOLUME

Handset volume can be changed.

STEP 1: Press

and

key. The LCD displays

the current volume.

STEP 2: Press

and

key again to alternate

between Large and Small volume.

• TO ACTIVATE HANDS-FREE

To Set Hands-Free On:

STEP 1: Press

and

key. The LCD displays:

To Set Hands-Free Off:

STEP 1: Press

and

key. The LCD displays:

• CALL INDICATOR LAMP ON/OFF

You can choose to turn the call indicator lamp either on

or off during ringing.

STEP 1: Press

and

key. The LCD displays:

• SELECT DIAL MODE

You can select one pattern from Normal, Dynamic Dial

Pad or Preset Dial to originate a call.

When only Dynamic Dial Pad is activated:

DT330/310

Feature

4:26 PM MON 12 JUL 2010

T/R VOL.

SMALL

Feature

4:26 PM MON 12 JUL 2010

T/R VOL.

LARGE

DT330/310

Feature

4:26 PM MON 12 JUL 2010

HANDS FREE

Feature

Note:

The call indicator lamp lights when used as a
Message Waiting Lamp, even when it is turned
off by the above operation.

4:26 PM MON 12 JUL 2010

HANDS FREE

OFF

DT730/710 DT330/310

Feature

4:26 PM MON 12 JUL 2010

INDICATOR ON

4:26 PM MON 12 JUL 2010

INDICATOR

OFF

DT730/710 DT330/310

Summary of Contents for DT310































































































































































































































































Search results

Summary of Contents for DT310

Reviews:

Brands by name

Popular brands

NEC DT310, User Manual

Search results

Summary of Contents for DT310

Reviews:

Brands by name

Popular brands