NEC DT310 User Manual Download Page 83

Page: 83 / 254

• TO DOWNLOAD A FILE

DT730 Series user can download files for Music on

Hold, Ringer Tone and Directory. When downloading

these files, the DT Series needs to be connected to the

network that has FTP (TFTP server).

Before starting the download, an IP Address of the

FTP/TFTP Server must be entered from DT Series.

STEP 1: Set up the FTP/TFTP server.

Put the downloading file into the designated

directory (for Windows IIS, the default is

“C:\InetPub\ftproot) of the FTP server.

Put the downloading file into a desired direc-

tory of TFTP server and then specify it as the

directory for downloading.

STEP 2: Select

Setting

(DT730) /

Setting

(DT710) on the

Menu

screen.

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key (DT730) /

key (DT710)

STEP 3: Select

Download

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

STEP 4: Select

Protocol

Select an item by either of the following operations.
• Highlight an item by using

, and then press

soft key.

• Press

key.

Note:

For details on the FTP/TFTP service, contact the
System Administrator.

DT730/DT710

Tool

[Menu]

Call Func.

Presence

Config

Directory

Back



History

Setting



Data Backup/Restore

[Setting]

Back



User Setting

Download



Summary of Contents for DT310































































































































































































































































Search results

Summary of Contents for DT310

Reviews:

Brands by name

Popular brands

NEC DT310, User Manual

Search results

Summary of Contents for DT310

Reviews:

Brands by name

Popular brands