2. Setting Up Your Projector
101
2.11.1
Remove the Projector Cover
Side cover of the projector head should be removed to mount the option board. For the
procedure of removing the side cover, refer to “1.7 Removing the Projector Covers” (See page
32).
2.11.2
Mount the Option Board to the Projector
This section describes the procedure of mounting the option board to the projector. This
procedure is described for the example, mounting the signal input board to slot B, when slot A
and B is empty.
[1]
Remove the blocking panel
from slot A.
<1> Loosen the fixed screws (2 places) of
slot A until their rotations become
idle. Screws cannot be removed.
<2> Remove the blocking panel.
Note
Attach the slot A blocking panel after fitting the signal input board into the slot B.
Carefully store the blocking panel and screws that you removed.
[2]
Remove the blocking panel
from slot B.
Remove the blocking panel as same
procedure as slot A. Carefully store the
blocking panel and screws that you
removed.
