3-22 Option Installation
Removing the Blank Panel
Use a screw driver to remove the metal slot cover by carefully pressing
it until it breaks away from the chassis.
!
CAUTION
Be careful of sharp edges!
Slide the device into the slot and secure the device.
7.
Connect the device cables (see “Cabling an IDE Device”).
8.
Replace the front panel.
9.
Replace the access cover.
Installing a 5 1/4-Inch Device
Install an accessible device into the device slot as follows.
1.
Follow the preinstallation instructions that came with the device, such as
setting jumpers and switches.
Note:
If your 5 1/4-inch device comes with drive rails,
do not attach them. Remove any rails attached. See the
documentation that comes with the device.
2.
Remove the access cover.
3.
Remove the device cage (see “Removing the CD-ROM/DVD Drive”).
4.
Remove and label any cables that interfere with installing the device.
