3-14 Option Installation
Diskette Drive Signal Cable
IDE Signal Cables
Each system comes with a three-connector IDE interface cable attached to the
primary IDE connector and the installed hard drive. A second IDE cable
connects to the CD-ROM drive and to the secondary IDE connector. In some
systems, a Zip drive also comes attached to the primary IDE cable.
The following figure shows a typical three-connector IDE cable. If the IDE
cable is not keyed with a connector tab, align the colored edge of the cable with
the pin 1 side of the drive connector.
IDE Signal Cable
System Power Cables
Power cables come from the power supply and are attached to the standard
storage devices. System power cables vary in length and provide connector sizes
to accommodate a variety of supported storage configurations.