3-12 Option Installation
The following figure shows the device slot locations in the system.
Locating Device Slots
Device Preparation
Before installing a storage device in the system, follow any preinstallation
instructions that come with the device. For example, check the following:
Accessible device
remove any termination jumpers on the optional
device. See the documentation that comes with the device.
IDE device
check the jumper settings on the device before installing it.
See the documentation that comes with the device for jumper setting
information.
An IDE device, such as an IDE hard drive or IDE CD-ROM drive,
must be set correctly as the first (master) or second (slave) device on
the IDE channel.
The standard IDE hard drive is set as the master device on the
primary IDE connector. The standard CD-ROM drive is the master
device on the secondary IDE connector.
Installation hardware — check to be certain you have the screws
necessary to secure the drive in an accessible drive slot.