NEC D400 Manual Download Page 60

Page: 60 / 68

Autodelete

This function allows you to automatically delete a previously unsent message when it is finally sent. To turn the Autodelete function on, off or

to set it to prompt you to delete the message, proceed as follows:

Press

1 4 9

. The Autodelete on/off/prompt menu will be displayed.

Press

to turn Autodelete on,

to turn it off or

to set it to prompt.

Reply requested

This function allows you to send a message which when replied to will be at your cost.. To turn the Reply requested function on, off or to set it

to prompt you to pay for the reply, proceed as follows:

Press

1 4 0

. The Reply requested on/off/prompt menu will be displayed.

Press

to turn Reply requested on,

to turn it off or

to set it to prompt.

Area messages

The following options are available for area messages:

Viewing area messages (see page 52)

Set power save option on or off

Display (set your phone to receive area messages or not)

Edit area message type list

Set power save option

The power save option will limit the amount of times your phone will look for area messages, this will reduce the power drain on your

batteries. To set the power save option on or off, proceed as follows:

Press

1 5 3

. The power save on/off menu will be displayed.

Press

to turn power save on or

to turn it off. A suitable confirmation screen will be shown and the view messages menu will be displayed.

Either make another selection from this menu or press

twice to return to the idle screen.

If you set Reply Requested to On you

maybe charged for messages sent to

you.

This function is network dependant

and you should consult your network

provider if you have any problems.

Summary of Contents for D400





































































Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands

NEC D400, Manual

Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands