NEC D400 Manual Download Page 24

Page: 24 / 68

Autoredial

With this facility on, your phone will try up to 10 times to redial a number if the first attempt fails. The intervals between each redial will get

longer after each attempt. A tone will be heard at each redial attempt. The failure to connect a call can be due to network problems or if the

other phone is busy. Pressing any key during a redial attempt will abort it. To set redial on or off, proceed as follows:

Press

8 4

. Press

to turn Auto redial on or

to turn it off.

Call timer

View calls

Press

5 1

. Then press the appropriate key for the calls to be viewed (see table right).

Use the

and

keys to scroll through the information.

Press the

key to return to the view calls menu or press and hold it down to return to standby.

Last call

The last call screen will display the duration of the last call made on your phone.

All calls

The all calls screen will display the duration of all calls made from your phone since the last time the call timer was reset and also the split

between calls made on your ‘home’ network and those made whilst roaming.

Outgoing

The outgoing calls screen will show the total time duration of all outgoing calls and also the split between calls made on your ‘home’ network

and those made whilst roaming.

Incoming

The incoming calls screen will show the total time duration of all incoming calls and also the split between calls received via your ‘home’

network and those received whilst roaming.

The Auto redial attempt tone will still be

heard even if the phone is set to the silent

mode (see page 19).

The Call Timer function will only be

displayed if your network or SIM

card does not support AoC.

View type

No.

Last call

All calls

Outgoing

Incoming

Summary of Contents for D400





































































Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands

NEC D400, Manual

Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands