NEC D400 Manual Download Page 23

Page: 23 / 68

Silent mode & vibration alert

To turn the silent mode and vibration alert on or off together, proceed as follows:

Press

7 2

. Press

to turn the silent mode and vibration alert on or

to turn them off. The silent and vibrator on/off

confirmation screen will be displayed momentarily and then the standby screen will be displayed.

Send tones

If you need to send DTMF tones during a call (e.g. to select options on an automated phone answering service), proceed as follows:

Press

7 5

. Press

to turn the tones on or

to turn them off. The tones on/off confirmation screen will be displayed

momentarily and then the standby screen will be displayed.

Answer key

Your phone will connect to an incoming call by pressing any key (except the

key) or by pressing the

key only. To set up how you

want to answer incoming calls, proceed as follows:

Press

8 3

. Press

for any key to answer or

for only the

key to answer. The answer key confirmation menu will

be displayed momentarily and then the standby screen will be displayed.

Autoanswer

The Autoanswer facility will cause an incoming call to be connected automatically only if you are using your phone as a car phone or with the

simple hands free kit.

Press

8 2

. Press

to set Autoanswer to on or

to set it to off. The Autoanswer on/off confirmation screen will be

displayed momentarily and then the standby screen will be displayed.

Autoanswer will only work if your phone is

connected to a car kit or headset.

It is recommended that you do not use the

Autoanswer facility if you have the ringer

volume set to off or your phone is set to

the silent mode (see page 19).

With Autoanswer set to ‘on’, you have 5

seconds to reject an incoming call before it

is answered automatically.

Summary of Contents for D400





































































Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands

NEC D400, Manual

Search results

Summary of Contents for D400

Reviews:

Related manuals for D400

Brands by name

Popular brands