NEC Aspila Topaz, Programming Manual

Page: 292 / 390

284
Programming Manual
Program 35: SMDR and Account Code Setup
35-02: SMDR Output Options
IN
SA
SB
Input Data(Cont’d)
Prog. No. Item Input Data Default
Related
Program
35-02-10
All Busy (ALB) Output
0 : Not Output
1 : Output
0
35-02-11
Walking Toll Restriction Table
Number 0 : Not Output
1 : Output
1
35-02-12
DID Table Name Output
0 : Not Output
1 : Output
0
35-02-13
CLI Output When DID to Trunk
0 : Not Output
1 : Output
0
35-02-14
Date
Determine whether the date should be
displayed on SMDR reports.
This option
must be set to “0” if the trunk name is
set to be displayed in Program 35-02-03.
0 : Not Output
1 : Output
0
35-02-15 CLI / DID Number Switching
0 : Calling Party No.
1 : Called Party No.
0
35-02-16 Trunk Name or Received Dialed
Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID
trunks. If set to (1), ANI/DNIS trunks can
print DNIS digits. If set to (0) trunk
names are printed instead
0 : Trunk port Name
1 : Received Dial
Number
0
-SMDR Printout Format-
12345678901234567890123456789012345678901234567890123456789012345678901234567890
XX/XX/XX PAGE XXX
CLASS TIME LINE DURATION STATION DIALLED No./CLI RD/COST ACCOUNT
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg hhhhhhh iiiiiiii
*Column 1(aa) : Call Number
Indicate the number. Up to 55 calls are printout per a page.
*Column 2(bbbb) : Class of Call
Indicate the type of call as below;
Item Description Item Description
AIN Incoming Call on Analogue Trunk POT Outgoing Call on Tie Line
AOT Outgoing Call on Analogue Trunk TOT Outgoing Call by Tandem trunk
IIN Incoming Call on ISDN Trunk ALB All Trunk Busy
IOT Outgoing Call on ISDN Trunk BRD Barred Outgoing Call
PIN Incoming Call on Tie Line BFL Buffer Full
*Column 3(cc:cc) : Time
Indicate a time(24 hours format) of incoming/outgoing/transferred call.
*Column 4(dd…) : Trunk Number/Name
Indicate a Trunk Number or Name.
*Column 5(ee:ee:ee) : Call Duration Time
Indicate a call duration time of call.
*Column 6(ff….) : Extension name
Indicate a Extension Name.
*Column 7(gg….) : Dialed data or received Caller-ID Data
Indicate the dialed data of outgoing call. And also, indicate the received Caller-ID data.