NEC Aspila Topaz, Programming Manual

Page: 137 / 390

129
Programming Manual
Program 20: System Option Setup
20-03:
System Options for Single Line Telephones
IN
SA
SB
Description
Use Program 20-03 : System Options for Single Line Telephones to set up various options for Single Line
Telephones.
Input Data
Prog. No. Item Input Data Description Default
Related
Program
20-03-01 SLT Call Waiting
Answer Mode 0 : Hook Flash
1 : Hook Flash +
Service code (894) For a busy Single Line
Telephone, set the mode used
to answer a camped-on trunk
call.
0 11-12-47
20-03-02 Ignore Received DP
Dial on DTMF SLT
Port 0 : Do Not Ignore
1 : Ignore Use this option to define
whether the system should
receive dial pulse and DTMF
signals (0) or ignore dial
pulse and only accept DTMF
signals (1)
0 15-03-01
20-03-03 SLT DTMF Dial to
Trunk Lines 0 : Receive all
dialed data, before
sending
1 : Direct through
out Type 0 : The system keeps the
digits dialed by the SLT on a
trunk in a buffer. After all the
digits have been received, the
system sends all the digits to
the trunk. If the time space
between digits is longer than
the timer in Item 4, the system
considers all digits received.
Type 1 : The system
passes the received dial from
the SLT to the trunk
immediately. If the SLT has a
Last Number Dial key without
a pause, this key may not be
able to use the Last number
dialing key with the Type 1
setting.
0 20-03-04
20-03-04 Trunk Call Dial
Sending Time by SLT 0-64800(sec.)
3
20-03-05 SLT Operation Mode
0 : Normal Mode
1 : Extended
Mode1
2 : Extended
Mode2
0
20-03-06 Headset Ringing
Cancel Time 0-64800(sec.)
5
Conditions
None