NEC Aspila Topaz, Programming Manual

Page: 190 / 390

182
Programming Manual
Program 21: Outgoing Call Setup
21-13:
ISDN Calling Party Number Setup for Extensions
IN
SA
SB
Description
Use Program 21-13 : ISDN Calling Party Number Setup for Extensions to assign each extension a Calling Party
Number (maximum 16 digits per entry). The calling number is the subscriber number of the dial-in number. When a
call is made by an extension which does not have an Extension Calling Number assigned (Program 21-12), the
system sends the calling number for the ISDN trunk defined in Program 21-13.
Note:
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Program 21-13.
Input Data
Extension Port Number Max. 4 digits
Calling Party Number Default
0-9,*,# (Max. 16 digits) No setting
Conditions
None
Feature Cross Reference
‹
ISDN Compatibility
Telephone Programming Instructions
To enter data for Program 21-13(Calling Party Number Setup for Extensions):
1 . Enter the programming mode.
2. Enter 21 13
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME ▼ keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
21-13-01 TEL200
PartyNo
21-13-xx
TELxxxx