NEC Aspila Topaz, Programming Manual

Page: 264 / 390

256
Programming Manual
Program 30: DSS/DLS Console
30-02: DSS Console Extension Assignment
IN
SA
SB
Description
Use Program 30-02 : DSS Console Extension Assignment to identify which extensions have DSS Consoles
assigned.
• You can have up to 9 different DSS Consoles. A single extension can have up to 9 64-Button DSS Consoles (9 is
the maximum allowed per system).
• Each extension in the system can have one 24-Button DLS Console (72 maximum). An extension can have a 24-
Button DLS Console in addition to 64-Button DSS Consoles.
When programming, each extension/DSS Console combination is called a Console Number.
There are 9 Console Numbers (1-9). You assign Console Numbers to extensions. When entering data, you normally
make the assignment for Console Number 1 first.
Input Data
DSS Console Number
The Extension Number for Key Telephone connected
with the DSS Console
Default
Related
Program
1-9
Max. 4 digits
No setting
Conditions
None
Feature Cross Reference
‹ Direct Station Selection (DSS) Console
Telephone Programming Instructions
To enter data for Program 30-02(DSS Console Extension Assignment):
1 . Enter the programming mode.
2. Enter 30 02
3. Enter the number of the item you want to program.
4. Select the DSS Console number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME ▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
30-02-01 DSS1
Ext.Number
30-02-xx DSSx
xxxxx