Chapter 8: Maintaining Your Printer
100
3. Remove the new Photoconductor module
from its packaging. If you do not plan to
immediately install the Photoconductor
module, cover it with a cloth to protect it
against overexposure to light.
4. Install both the Photoconductor module and
the Toner module into the printer. Line up the
blue and green markings on the inside of the
printer with the blue and green markings on
the imaging modules. Then align the guides of
the modules with the grooves inside the
printer.
Note:
Make sure the Photoconductor
module is inserted inside the printer as far
as it will go.
5. Close the Top cover of the printer.
Cleaning the Printer
Clean the printer at regular intervals to avoid the
build up of dust, dirt, and paper lint on the inside
and outside surfaces of the printer.
Photoconductor
module
Summary of Contents for 870 - SuperScript B/W Laser Printer
